PRODUCTS CENTER
Product Description
Pneumatic slide valve is a kind of powder, grain material, granular material and small pieces of material transportation pipeline, the main control equipment to adjust or cut off the flow of materials, widely used in metallurgy, mining, building materials, chemical industry and other industry systems, control the flow of materials adjustment or cutting action.
1. When the valve is installed on the pipeline, the stem can be upward or horizontal.
2. Check whether the thread connection is loose, and adjust the tightening;
3. Remove the cover at both ends of the valve channel, clean the inner cavity and remove the grease;
4. After peeling off the protective oil paper of the valve stem, re-apply grease on the valve stem;
5. Flush and clean the pipeline to avoid damage to the sealing surface.
4. When the valve is opened and closed, the electric (pneumatic) actuator is opened and closed through the lifting of the valve stem. The force should be uniform during the opening and closing process. Before it is in place, it should be opened slowly and gradually in place or closed to seal.
Pneumatic flapper valve has the advantages of simple structure, flexible operation, light weight, no card group, especially suitable for all kinds of solid materials, about 50mm, mass material conveying and flow regulation, installation is not limited by angle, convenient operation, can adjust the opening degree at any time and other advantages.
Warm tips:
All text, data, and images in this article are for reference only. Need to see moreTwo-way plate valveFor details of performance parameters, structural size parameters, prices, etc., or for high-quality printed samples, pleaseContact Us
CNOTACT US
Telephone:+86-371-63686248
Fax:+86-371-63686248
Contact: Yu Tian
Mobile:+86-15551530000/+86-13703820603
Website:http://www.chinasffm.com/
Address: No. 66, Jinhua Road, Shangjie Valve Industrial Park, Zhengzhou City, Henan Province